CCNA Training | ProSkills Institute

CCNA Certified Training

01. Course Overview

CCNA certification helps one in internetworking jobs ensuring that employees of associate-level have the property to validate, to configure, to install, to operate and also help in network troubleshoots. It is quite an interesting program and most of the employees now days go for a certified course so as to get better promotions and better opportunities in the corporate world. But it is necessary to get certified from good institutions who promise a better tomorrow. This course at 9to5 Technologies will help you get better and allows one to achieve the best career opportunity.

02. What is CCNA?

The CCNA Certification has been formulated by Cisco and stands for Cisco Certified Network Associate. CCNA is the most popular certification in the Networking Industry; It builds as the initial bridge among all other certifications courses. CCNA is the most sought certification program for entry level Network Engineers. CCNA certification builds the foundation knowledge in Networking. Because the certification opens the door wide into the world of IT networking, it is considered one of the best IT certifications.

03. CCNA Training in Punjab

We all are very busy building our careers. It is time to stink differently since normal graduations and post graduations won’t work these days. Even if when you are attached to a working space, an office or organization or any business, recruiters seek business and certified degrees that will help you establish your career. With this comes a specialized career course that not only adds value to your resume but also establishes yourself in your genre. CCNA training institute in 9to5 is one such space that provides you with unique CCNA training. It’s the genre of technology and data management and one has to be a pro at this. Those network engineers and data engineers working their best in industries, if they gain this certificate course, will not only be posted to a higher designation but some can even travel the world!

04. Job Scopes

Designation and job role of a CCNA certified candidate varies according to his track and knowledge of a candidate. Let’s discuss a few job roles that you can get after CCNA certifications.

System Engineers (Computer Networking/ IT): The Prime responsibility of a system engineer is to install and manage different devices (systems) in an organization. That may include different hardware of PCs, routers, switches or other devices being used. For this, you will have to get a good knowledge of different hardware aspects of Router/ Switches.
Technical Support Engineer: Key responsibility of TSE is to resolve customer issues over the phone or via remote access. IT Tech support monitors, maintains and troubleshoot computer system and network in an organization.
Desktop / Network Support Engineer: It is more efficiently described as L1 and L2 support engineers. You will not get direct access to routers or switches but you will have to give proper support to engineers who have the access.
Network Administrator: System Admins and Network Admins are two different job profiles but in some small scale companies, it could be same.
Network Engineers: This is one of the most popular job roles in the networking field. They can work as a part of IT support team in an organization. Designing, Implementing, Maintaining and support of a company’s network are their core responsibilities. Cisco networking skills play a huge part in this job role.
Network Security Associate: Perfect for candidates who want to make their career in Network Security. Job roles of a security associate include performing basic security vulnerability assessment to identify security threats. Please note that if you want to go for a job in security, you will have to do both CCNA Routing and Switching and CCNA Security.
Other Job roles: Many other job roles are also available depending on the CCNA Track. For example, if someone has good knowledge of wireless fundamentals, he can easily get the job on that basis. Other job titles are like Network Support Technician, Data center Associate, Video and Voice Engineers etc.

05. Course Content

NETWORKING CONCEPTS

Components of a network – router, switch, hub, bridge, etc
Types of Network – LAN, MAN, WAN, VPN, PAN & Content Network
Defining Network requirements – NIC- Ethernet (CSMA/CD)
10/100/1000 Mbps DUPLEX (Half/Full/Auto) – Connecting Media – Coax.
10 base 2T – UTP/STP – CAT 1/2/3..
Straight through/cross crimping (only details no practical)
Fiber optics – Single/Multimedia
100 Base-TX/FX etc – wireless communication.
Ethernet cabling Standard.
Connecting Devices
Repeater – Hub – Switch – Bridge – Topology – Bus/Star/Ring

OSI – MODEL

7 Layers – Communication between the Layers (Encapsulation & De-encapsulation) – PDU.
Layer 2 – MAC/LLC – 802.3/802.2 (SAP/SNAP) /Ethernet II – Frames
Broadcast/Collision domain – point of -Hub/Switch/Router
L4 – 3way handshake – windowing – and about – Connectionless
Packet size [64B (mini) to 1518B (Max)]

TCP/IP MODEL & IPV4 ADDRESSING

All Layers of TCP/IP Compound with – OS
Application Layer – TFTP/FTP/SMTP/TELNET/SNMP/DNS
Transport Layer – TCP/UDP – TCP Segment Format
3-way handshake/windowing – UDP segment Format
Internet Layer
IP datagram format – Protocol No. – TCP 6 – UDP 17
ICMP – ARP – RARP
Introduction to IP addressing – Class A/B/C/D/E
Private IP address – First OCTET range etc.

SUBNETTING

Default Subnet Mask
Class C Subnetting & Practice no. given
Class B Subnetting & problems
Class A Subnetting & problems

INTRODUCTION TO IPV6

Introduction
Host Address Assignment
Unicast, Multicast, and other Special ipV6 Addresses
Configuring ipV6 Routing and Routing Protocols
Translations between ipV4 and ipV6
Summary

BASIC OF ROUTER & CONFIGURATION

Selection of Router & Cabling a Route
- When Router used – LAN with WAN connect – to connect networks of different IP
- The different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
- Cables used in different interfaces/purpose of interfaces
- WAN interface cable – EIA/TIA – 232/449/530 – V.35 – X.21
- Different CISCO series – modular/fixed – 10mbps/100 etc
- Straight through between DTE & DCE

DIFFERNENT MODES OF OPERATION & BASIC COMMANDS

Internal Components:
- ROM – POST – BSL – ROM-MONITOR PRG – MINIIOS
- The different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
- DRAM -Running Config
- NVRAM – Startup Config
- Flash MEM – IOS
Different Modes:
- ROM Monitor – Reboot Mode – Setup – Exec Model
Exec Mode
- User -Privilege – Global – Sub-configuration mode
- Syntax/command to switch between modes
- Assigning an IP address for -E0-S0-S1
- Enabling/disabling – console/privilege / by password
- Mold – command
- Show Config / start / run / version / flash
Basic commands practice
- Changing between modes – (user-privilege- Global-etc)
- IP address configuration-E0-S0-S1
- Password – enabling – encrypting it
- Practice – motd – show commands – editing commands
- Assigning hostname (for Router)
Advanced Commands
- Register value – X2102 – boot field value/purpose ROM monitor made – password breaking 8th/6th/13th bit of register value importance
- Boot system flash/network/ROM – config-register (Changing register value) – etc command purpose Booting sequence – Backup & Recovery – CDP
- Practice the above commands as well as following
- Telnet – [ctrl+shift+6]x – disconnect – sh users /Sessions
- Clear lines resume – [hostname resolving in telnet domain Enabling/disabling etc – no practical for this alone]
- Overview of Cisco SDM (Security Device Manager)

IP ROUTING

IP Routing, Static Routing & Default Routing
- IP routing – static routing – default- dynamic routing
- Providing clock rate to up the link after identifying DCE by “Sh controllers” command
- Commands/syntax – Static/default routing
Static Routing & Default Routing
- Practical-session for Static & default routing
Dynamic Routing and RIP
- Dynamic Routing – IGP & EGP.
- IGP – RIP-OSPF – EGRP – EIGRP
- Classes of Routing Protocol – Distance vector – Link State – Balanced hybrid
- Role of Routing Protocol – builds/updates/selects & Routes the packet
- Soluting for Routing loops – Max. loop count – split-horizon – Route poison Reverse – Hold down Timer
- Features of RIP – distance vector algorithm – RIP V1/V2 – load sharing – metric (depends – loop count)
- Metric value depends – loop count – Ticks – delay – Reliability – cost – MTU – Bandwidth
- Command – Router RIP Network
- Sh IP route
- Timer value for RIP– Update/Invalid/ hold down/flush Timer
RIP
- Dynamic Routing – RIP Practical
Dynamic Routing EIGRP & OSPF
- Limitations of the distance vector algorithm
- Features of EIGRP and its operations
- Configuring EIGRP – “Auto-redistribution”
- Verify and troubleshooting EIGRP
- Features of OSPF and its operation
- Configuring single area OSPF
- Verify and troubleshoot OSPF
Access List
- Purpose/advantage of Access-list
- IP [-for a host – for a network/sub network].
- Std IP access-list – wild card calculation
- Extd IP access list
- Switch port ACL,
- Step involved in creating access list
- Applying access list at the interface – (inbound/outbound)
- Named access-list for IP
- Access-list in Telnet sessiont
IP standard Access List
- Practical on
- IP Std access-list
IP Extended Access List
- IP Extd access-list, named access lists
NAT
- Implement, Verify & Troubleshoot NAT
  - Explain the Basic Operation Of NAT
  - Using (including CLI/SDM)
  - Practicals on Static NAT, Dynamic NAT and PAT
  - Troubleshoot NAT issues
WAN Technologies
- WAN Technologies- Leased Line
  - Leased line
  - P to P communication
  - HDLC & PPP protocol-features
  - Enabling HDLC & PPP
- PPP Link
  - PPP layer & its explanation/role
  - PAP/CHAP role
  - Configuring PAP/CHAP using commands
- VPN
  - Describe VPN technology
  - Importance Of VPN
  - Benefits & Role
  - Impact & Components
- Frame-Relay
  - Packet Switched Network
  - Virtual circuit – DLCI – Access-link – CRI – FECN – BECN – LMI
  - Enabling Frame-relay
  - Inverse ARP
  - Configuring frame-relay for
  - Mesh Network
  - Star Network
  - Combination of above two
Switching
- Switching Operation and Configuration
  - Function –add-learning / Forward-filters the Frame / loop avoidance
  - Redundant path and its problems
  - Spanning Tree Protocol – purpose – its different state (blocking/listening/learning/forwarding)
  - Modes of operation of switch/Bridge
  - Port duplexing
  - Switch & hub – half duplex
  - Switch & Server – full duplex
  - CISCO catalyst switch 1912 & 1924 interface details
  - M/K/I modes
  - Basic and advanced commands
  - Enabling & configuring MAC address table
- VLAN Configuration
  - VLAN – ISL – Trunking
  - Enabling Trunking
  - Assigning VLAN No. & name
  - Configuring ports to a specific VLAN
  - VTP purpose
  - VTP domain
  - VTP modes of operation
  - Switching Technologies (including VTP , RSTP , PVSTP, 802.1q)
  - Implement Basic Switch Security (including Port Security , Trunk access .etc )
Wireless LAN
- Wireless Intro & Operation
  - Standards associated with Wireless Media (including WI-FI Alliance, ITU/FCC)
  - Ad-hoc mode, infrastructure mode
  - SSID, BSS, ESS
  - Basic Parameters to configure on a Wireless Network
  - Wireless Security Feature’s (WEP, WPA 1 / 2 )
  - Implementing Wireless Networks